Weatherproof Silicone Sealant

1. middle/low modulus, one part 2. excellent tensile strength and good adhesion

JOINLEADER 880 Weatherproof Silicone Sealant

PRODUCT DESCRIPTION

JOINLEADER 880 Weatherproofing Silicone Sealant is a middle/low modulus one-part, neutral-cure, architectural grade sealant.

It has good adhesion and elongation qualification to aluminum material, glass, coated glass, concrete, some plastic, natural stone and timber, etc., and shows no sign of corrosion or defile.  

JOINLEADER 880 Weatherproofing Silicone Sealant is totally free of the influence of rain, snow, sharp change in temperature and longtime being illuminated by ultraviolet ray.

FEATURES

Stable and flexible from –50°C to +200°C

Ideal for expansion, connection, perimeter and other movement joints

Excellent unprimed adhesion to a wide variety of construction materials and building components

Neutral cure – suitable for use on coated glass, galvanized steel, masonry and other porous and non-porous substrates

Cures to a strong, flexible seal capable of withstanding movement in and around the joint.

Non-slumping, can be used in vertical and overhead joints.

Excellent weatherability, virtually unaffected by sunlight, rain, snow, ozone.

Resistant to weathering, ultra-violet radiation, vibration, moisture, ozone, temperature extremes, airborne pollutants, cleaning detergents and many solvents.

TECHNICAL DATA

As Supplied – tested at 23°C±2°C, RH50%±5%:

Item                                       Data                     Standard

Gravity of colored,   g/cm3        1.35~1.45

Gravity of transparent, g/cm3      0.97~1.05

Sag/Slump, mm                   ≤1                  ASTM D2202-00(2006)

Tack Free Time, min.               20~50                  GB/T 13477.5-2002    

Extrudability, ml/min.               ≥80                 GB/T 13477.3-2002

As Supplied – tested at 23°C±2°C, RH50%±5% 7 days :

Hardness, 24H,Shore A             ≥15                     ASTM D2240-05

Hardness, 7d, Shore A           ≥25                     ASTM D2240-05

Depth of curing, 24H, mm           ≥2                       ASTM C1184-05

Depth of curing, 7d, mm         ≥6                       ASTM C1184-05

Recovery of elastic, %              ≥80                   GB/T 13477.17-2002

Tensile modulus(MAX), MPa       ≥0.4(+23°C)             GB/T 13477.8-2002

                                 ≥0.6(-20°C)             GB/T 13477.8-2002

Adhesion failure area, %           ≤5                    GB/T 13477.8-2002

Elongation at break, %             ≥350                   GB/T1040.2-2006

105°C volatile content, %           ≤5                      ASTM D1489-97(2004)

Movement Capability Level,%       25                       ISO 9047

APPLICATIONS

JOINLEADER 880 Silicone Weatherproofing Sealant is a specified, premium performance weather sealing product specifically designed for general glazing and weather sealing in curtain wall and building facades.

JOINLEADER 880 Weatherproofing Silicone Sealant could be used for assembling, sealing, sticking and repairing of most glass.

As weatherproof sealant, it could be applied on the connecting and compensating seam of many kinds of material such as glass, plating glass, ceramic tile, ceramic, etc.

APPLICATION LIMITS

JOINLEADER 880 Weatherproofing Silicone Sealant is not suitable for adapting to structural fitting and following situations:

1. To all surfaces that bleed oil, plasticizers or solvents such as wood immersed in oil, oil crack filler, and some uncured or sulfurized fat and to surface where is wet;

2. To the substrate that the surface temperature exceeds +50°C or apply at temperatures below 5°C;

3. Use in the manufacturer of IG units;

4. To closed or confined areas where sealant cure may be inhabited by lack of air (silicone sealant need the water in the air to cure);

5. To use in construction or sealing of aquariums;

6. To the painted surfaces, may cause seal failure as the paint cracking or stripping;

7. To the surfaces that with direct touch of food.

8. Do not use for structural glazing.

9. If the sealant is intended to be painted (paints do not typically adhere to most silicone sealants)

10. Not recommended for continuous water immersion applications.

11. Not recommended for use with marble and similar highly porous

12. Not recommended for joints where movement Capability level exceeds 25

13. Not recommended for use in below ground joints or trafficable

14. Joints where abrasion and physical abuse are encountered.

15. Contact with acetoxy silicone sealant

HOW TO USE

APPLICATION TEMPERATURE:   +5°C to +40°C

Cleanse with a cleaning agent, to keep the substrate surfaces completely clean(JOIN LEADER also provide the cleaning agent for your convenience).

Use the sealant after cleaning agent dries, around 1~2mins later. You can use two different cloth, one for cleaning agent, and the other for sealant. (Notice that the two can’t be mixed use together, and the second cloth will be better purified cotton and no picking.)

For better appearance, cover outside of joint areas with masking taps before application.

Cut nozzle to desired size and extrude sealant to joint areas.

Tool immediately after sealant application, make it smooth and remove masking tape before sealant skins.

SHELF LIFE

12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and 27°C.

COLOR

Black, transparent, gray, bronze, limestone, precast white and white.

Also we can produce the sealant with special color upon customers' requirement.

PACKAGING

Cartridge: 280ml, 300mL

Sausage: 300mL, 600mL

Weatherproof Silicone Sealant